What Is the Process for a DIY Project?

One of the best ways to increase your solar ROI and lower the cost of your solar project is to install your system yourself. This can also be a great option for customers who don't yet have installers in their area.

This article will outline the process for do-it-yourself (DIY) customers.

Finalizing a Design

Important note: some jurisdictions will not permit DIY installs. For this reason, we do not offer DIY in some areas, including the state of New Mexico.

The first step for a DIY project is the same as any solar project--we need to finalize a design.

Prior to making a deposit, our Customer Support Team offers information, answers to questions, quotes, and basic designs free of charge. To get in touch with them, message us directly on Instagram/Facebook, use the chat bubble on our website, or email support@projectsolar.com.

After making a deposit, you will be paired with an Onboarding Specialist who will help you finalize your design. 

Your Onboarding Specialist will also collect the information and photos that our engineers use to draw up the structural and electrical plans for your system. 

Once you've submitted all the required information and decided on a design, we'll draw up a contract for your system and present it to you to sign. 

 

Plans and Permits

After you've signed your contract, we'll move you to the back-end stages of the process: engineering, permitting, installation, etc. For more information on these steps, you can check out our article on The Post-Contract Process.

Even with DIY projects, Project Solar will take care of drawing up engineering plans and coordinating with your jurisdiction for approval. This process can take a while, as each jurisdiction has different policies and processing times.

A bill of materials, showing all the equipment included with your system, is created after your plans are approved, and is available upon request.

We will ship your equipment directly to your home, and packing lists will be included with material shipments. We require payment prior to equipment shipment for DIY projects. 


Equipment - What's Included?

We provide the majority of the equipment for your solar install. The equipment provided through Project Solar will include the following:

  • solar panels
  • microinverters & microinverter hardware
  • AC disconnect
  • meter socket (if needed)
  • Enphase combiner box
  • rails & rail hardware
  • footings
  • rooftop junction box

Currently, we're sourcing IronRidge racking/railing
Enphase IQ8+ microinverters, and Canadian Solar 390W/395W panels (depending on exact location).

With Full Service Install projects, other system components--called "Balance of System" items--are sourced by our partnered installer. Since DIY projects are done without a partnered installer, these components will need to be provided by the customer.

Balance of System items include: 

  • copper grounding wire
  • conduit wire and piping 
  • combiner box breakers and main panel breakers
  • small items such as wire nuts, grommets, extra sealant, etc.
  • tools, drill bits, harnesses, and other safety gear

 

Installation

After your equipment has been delivered, you can begin the installation of your system. We provide instructional materials, including some video guides.

However, DIY instructions may not currently contain specifics for flat roof installations or ground mount installations. We are working on expanding our instructional material for these types of projects.

We do not offer Enphase batteries DIY, as battery installation can be difficult and complicated, and installers need to be Enphase Certified for batteries to be commissioned. 

If you have questions or concerns during install, Project Solar provides install support via phone.

The only part of the installation process that deals with live wires is the grid tie, where your system is connected to the main power grid. Most homeowners hire a handyman or electrician for this step of the project. 

For a basic idea of the solar installation process, check out these blog posts:
"Installing Solar in 4 Basic Steps"
"How to Install Solar Panels"

 

Inspection, PTO, and Activation

Before switching it on and producing power, your system will need to be inspected to make sure everything is installed safely and correctly. We'll schedule this inspection with your jurisdiction. 

After your system has passed inspection, we'll then apply for Permission to Operate (PTO) from your power company. Then, once this is granted, an Activation Specialist will reach out to help you turn on your system and begin generating clean energy!

 

Was this article helpful?
2 out of 2 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

Our live chat hours:
9:00am - 5:00pm MT Monday to Friday
Follow us on Twitter
Follow Us on Instagram
Back to Help Center